Enquire Now

We offer a full re-calibration service for Ebro data loggers as well as repairs to damaged units. Please enquire now for a quote or to organise your loggers to be re-calibrated or to be repaired.

When is a good time to have a logger re-calibrated?

This is a question that will cross the minds of everyone responsible for managing an inventory of loggers. Although not mandatory, it is good practice to have all loggers under your control re-calibrated on an annual basis, providing confidence in the accuracy and therefore peace of mind. Once every twelve months is a standard time period between calibrations. The calibration for our Scientific/Medical logger is valid for 24 months but we do recommend validation during that time. Following this voluntary schedule should be even more of a priority especially when loggers are used to monitor the temperatures of either medical related processes or the storage conditions of high value perishable products. The most common reason for a logger to go out of calibration is unintentional handling mishaps to a logger. i.e. any handling incidents suffered by a logger that are out of your control. For instance, while a logger is in transit with a product shipment etc.

As an example, if a logger has been dropped on the floor there is a chance that the temperature sensor has had stress applied to it from the fall. If this has happened, the stress applied to the logger temperature sensor will change the characteristics of the temperature sensor, which can alter the accuracy of the logger. This event may shift the logger accuracy away from results provided on the original calibration certificate. For this reason alone, it is good practice to have your loggers accuracy checked annually by re-calibration.

Categories: , , ,